RhinoMoto Bar Ends For Bar End Mirrors for BMW S1000RR / HP4 (09-18) / S1000R, and R NineT
- Brand: RhinoMoto
- Product Code: 0168-001
- Availability: 1
- Stock Quantity: 1
These bar ends feature steel bodies for vibration dampening weight plus replaceable plastic buttons for the sliding surface
They are designed specifically to fit BMW R nineT, S1000RR and S1000R bars and feature a groove to accept CRG or similar bar end mirrors.
GEN-1 is for CRG or similar bar end mirrors.
The all new GEN-2 version allows for use of all type of bar end mirrors by eliminating the inner collar, you can now slide mirrors that do not spit in two into place before install!
Some manufacturers make brackets that
do not open all the way up, but instead have an almost completely
circular opening with a slot. These brackets get pinched down when the
bolts are tightened to clamp onto handlebars. Motogadget and Rizoma are
two such manufacturers and we call this type of bracket a “closed
style”. Unfortunately, these clamps will not work with our original
designs because the outer diameter of the mounts is too large for the
clamps to slide over to reach the slot. RhinoMoto has started releasing
what we call our Gen 2 kits to work with these mirrors. The bodies are
two pieces so that the mirror can slide onto the smaller diameter
section from the rear. A dress ring is included so that when assembled
these kits look exactly like the original kits. The use of the dress
ring is optional and the mounts are usable without them if desired.
All Gen 2 kits also work with open clamp mirrors. They are compatible with all of our spacers and adapters so that we can easily produce a Gen 2 version of any existing kit.
The bodies are available in black powder coated or stainless finishes, and flat style button only.
These bar ends mount with the same large M12 bolt used on the stock bar ends, so they are VERY rugged and retain much of the vibration-damping weight of the stock bar ends.
Kit includes 2 mirror mounts, stainless steel M12 fasteners, installation instructions and 2 RhinoMoto logo stickers.
Make | Model | Years |
---|---|---|
bmw | hp4 | 2013 - 2014 |
bmw | hp4 race | 2017 - 2018 |
bmw | r ninet | 2014 - 2024 |
bmw | r ninet /5 | 2020 - 2022 |
bmw | r ninet pure | 2017 - 2023 |
bmw | r nineT Racer | 2017 - 2020 |
bmw | r ninet scrambler | 2016 - 2023 |
bmw | r ninet Urban G/S | 2017 - 2023 |
bmw | s1000r | 2014 - 2020 |
bmw | s1000rr | 2009 - 2018 |
Tags: RhinoMoto, Bar, Ends, Bar, End, Mirrors, BMW, S1000RR, HP4, race, S1000R, R NineT, pure, scrambler, urban, racer