RhinoMoto Bar Ends For Bar End Mirrors for BMW Models - M8 Universal Long

These bar ends feature steel bodies for vibration dampening weight plus replaceable plastic buttons for the sliding surface

They are designed specifically to fit stock BMW K1200R/S, R1200R (to 2012)/S, F800S and other clipons and feature a groove to accept CRG or similar bar end mirrors. They are designed for any models that attach with M8 bolts to bars that protrude out past the grips approximately 1/2″  The bodies are available in black powder coated and three button styles

These bar ends mount with the same large M8 bolt used on the stock bar ends, so they are VERY rugged and retain much of the vibration-damping weight of the stock bar ends.

GEN-1 is for CRG or similar bar end mirrors.

The all new GEN-2 version allows for use of all type of bar end mirrors by eliminating the inner collar, you can now slide mirrors that do not spit in two into place before install!

Some manufacturers make brackets that do not open all the way up, but instead have an almost completely circular opening with a slot. These brackets get pinched down when the bolts are tightened to clamp onto handlebars. Motogadget and Rizoma are two such manufacturers and we call this type of bracket a “closed style”. Unfortunately, these clamps will not work with our original designs because the outer diameter of the mounts is too large for the clamps to slide over to reach the slot. RhinoMoto has started releasing what we call our Gen 2 kits to work with these mirrors. The bodies are two pieces so that the mirror can slide onto the  smaller diameter section from the rear. A dress ring is included so that when assembled these kits look exactly like the original kits. The use of the dress ring is optional and the mounts are usable without them if desired.

All Gen 2 kits also work with open clamp mirrors. They are compatible with all of our spacers and adapters so that we can easily produce a Gen 2 version of any existing kit.

Kit includes 2 mirror mounts, stainless steel M8 fasteners, installation instructions and 2 RhinoMoto logo stickers.