AELLA Adjustable Foot Peg Kit for Ducati Hypermotard 698 Mono

This is a machined aluminum variable Foot pegs that can be used in place of the standard ones.

By changing the mounting position, the step position can be changed on a circle with a radius of 15 mm from the original position. (24 positions)

The angle of the top surface of the step bar can also be adjusted to 0°, 15°, or 30° to fit the angle when riding while standing or sitting.

In order to protect the rear master cylinder, the step bar will not completely collapse even in the event of a fall.

The step bar surface also uses a unique high-grip cutting pattern that is non-slip.

By removing and attaching the variable plate, you can set the same position as the original (+1 position)

■Caution
* Depending on the position, the step bar may come into contact with the cover when folded down.
* Depending on the position, the bottom of your pants may get caught. We recommend wearing off-road boots.
* Depending on how the load is applied and how it is used, the soles of the boots may wear down easily.
* The step bar cannot be folded down completely.