Accossato CNC Clutch Master Cylinder 16x15-16-17

Accossato Radial Brake Master Cylinder For Motorcycles In CNC-worked aluminium Adjustable 19 x 17-18-19. The Master Cylinder includes A Revolution Lever Type: adjustable length, adding or removing insterts.

CNC-worked Radial Brake Master cylinder is an Accossato Flagship product. The Piston diameter is 19mm: suitable for dual-disc system. The distance is adjustable between 17-18-19 mm: Suitable for all uses because you can adjust the distance depending on the situation of use. The Revolution Lever is adjustable by adding or removing inserts. The radial brake master cylinder is fully Made in Italy; the screws are made in stainless steel, The bleeding valve is in zinced steel and the seals are made with Formula 1 compound. There's an off-set riser, in order to reduce the bending of the master cylinder while braking. Every component is designed to guarantee the shortest passive stroke: pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial master cylinder. Screw pitch for fitting the hoses is M10x1. The stop light switch is not included - you can purchase it separately using code ID001 or ID002. The fluid reservoir is not Provided with the master cylinder, you can purchase it separately choosing between several models.

Useful Information

Accossato Master Cylinder

Master Cylinder Instruction