RapidBike "Auto Blipper" Shift Assist for Yamaha XSR 900 (2016+)

$420.00

  • Brand: RapidBike
  • Product Code: K27-BLIP-002B
  • Availability: 1-2 Weeks
  • Stock Quantity: 0

?

PLEASE NOTE: this product Requires a Rapidbike EVO or RACING module to work - it is NOT standalone. A generic shift rod will be included in this kit and may need to be resized. It is the customers / installers responsibility to assure correct , safe and  sound fitment and connection of the heim joints and the rod ends.

UP/DOWN SHIFT ASSIST 

The New UP/DOWN SHIFT ASSIST represents a big step forward in terms of quick-shifting solution offered by RAPID BIKE thanks to a further technological development to perform up-shifting (traditional mode) as well as down-shifting operations (the so-called ?blipper?, available only for bike models equipped with ?ride by wire?). A new device reaching unmatched technical standards designed to deliver outstanding performance to race track enthusiasts and further improve riding experience. 

This new shifting device exchanging information with EVO and RACING add-on modules via CAN-bus allows to perform auto-calibration of shifting kill-time in relation to the pressure applied in both directions, upper and lower gear, while matching the engine peculiar configuration. A greater bike?s handlebar control and lower mechanical stress, granted by the unique ?self-learning? process, improve considerably driving safety. 

This new accessory actually inherits all the benefits and advantages of previous ?All around quick shifter sensor? including full compatibility with YouTune to manage pressure level applied for activating shifting operations. Another additional feature to be managed via YouTune is the modulation of engine response sensitivity when opening throttle control.  

Installation manuals and software are available for download at HERE

NEW WARM-UP FEATURE AVAILABLE WITH BLIPPER KITS - https://www.facebook.com/RapidBikeItaly/videos/788109239252144


With new firmware 406 already available for free download, Rapid Bike Blipper kit allows the engine to warm up automatically (with accelerations at regular intervals) without any need to hold the throttle.


Below you can find detailed procedure to update firmware of blipper units already installed:

  1. Turn ignition ON
  2. Open menu FIRMWARE
  3. Select UPDATE SHIFT ASSIST FIRMWARE FROM FILE
  4. Select file QuickShiftBlipper_406.flc.
  5. Software will confirm once done.
  6. Turn ignition OFF and wait for at least 1 minute before using the bike as Shift Assist unit needs to be rebooted after firmware update.


All Rapid Bike blipper units are not stand-alone and requires the installation of EVO / RACING fueling kits.

Make Model Years
yamaha xsr900 2016 - 2024

Write a review

Note:It will not be shown publicly
Note: HTML is not translated!
 Good   Bad
Captcha

Tags: RapidBike, Auto, Blipper, Shift, Assist, Yamaha, XSR, 900, 2016