AELLA Crankcase Breather for Ducati 848/1098/1198 and Multistrada 1200 (Internal Pressure Control Valve Evo 2)
- Brand: AELLA
- Product Code: AE-62052
- Availability: 1
- Stock Quantity: 1
For peak performance, it is VERY important to Optimize the pressure state inside the crankcase and airbox!
Keep the crankcase internal pressure proper by merely installing our high tech AELLA Crankcase breather. Our EVO 2 internal pressure control valve relieves excessive engine braking. This helps to eliminate the rear wheel lock at the time of entering the corner and the acceleration from the apex, to realize a smoother running bike.
AELLA's Evo
2 Crankcase breathers are especially effective with the Ducati L-twin
engine, which shares one crankcase because the compression resistance
inside the case is very strong due to the structure's shape.
Resistance
decreases with wearing, idle rotation may increase by 200 to 500 rpm in
some cases. Just by installing, it quickly changes to a smooth and
torqueful feeling over the whole area. Please experience the change as
if you tuned the engine with your own car. Fuel economy usually increases as well, since engine resistance is decreased.
We recommend cleaning cleaning every time the engine oil is exchanged.
The
breather tower type demonstrates the maximum effect with crankcase
direct connection, but at the same time it increases the amount of oil
mist attached at the same time. When oil mist adheres to the valve, it
inhibits the movement of the valve, which in the worst case causes the
valve to stick. We will restore the original state just by cleaning the
interior of this product with a parts cleaner, so we recommend cleaning
every oil change.
Fits the following models:
SuperBike:
- 1198
- 1098
- 1198R
- 1198SP
- 1198S CORSE
- 1198S
- 1198
- 1098R
- 1098S
- 1098
- 848EVO CORSE
- 848EVO
- 848
Streetfighter:
- 1098/S
- 848
Multistrada:
- 1200DVT Enduro
- 1200S DVT PikesPeak
- 1200S DVT
- 1200DVT
- 1200S GT
- 1200S
- 1200PikesPeak
- 1200
Bikes with a Ram Air system (848/1098/1198) should also install a blow-off valve (AE-63007) which is recommended for installation.
Make | Model | Years |
---|---|---|
ducati | 1098 | 2007 - 2008 |
ducati | 1098r | 2008 - 2009 |
ducati | 1098s | 2007 - 2008 |
ducati | 1198 | 2009 - 2011 |
ducati | 1198r | 2010 - 2010 |
ducati | 1198s | 2009 - 2010 |
ducati | 1198sp | 2011 - 2011 |
ducati | 848 | 2008 - 2010 |
ducati | 848 evo | 2011 - 2013 |
ducati | multistrada 1200 | 2010 - 2017 |
ducati | multistrada 1200 enduro | 2016 - 2018 |
ducati | Multistrada 1200 enduro Pro | 2018 - 2018 |
ducati | multistrada 1200 granturismo | 2013 - 2014 |
ducati | multistrada 1200 pikes peak | 2012 - 2017 |
ducati | multistrada 1200s | 2010 - 2017 |
ducati | multistrada 1200s d air | 2015 - 2017 |
ducati | multistrada 1200s sport | 2012 - 2014 |
ducati | multistrada 1200s touring | 2012 - 2014 |
ducati | Multistrada 1260 | 2018 - 2020 |
ducati | Multistrada 1260 enduro | 2019 - 2021 |
ducati | Multistrada 1260 Pikes Peak | 2018 - 2020 |
ducati | Multistrada 1260 s | 2018 - 2020 |
ducati | streetfighter 1098 | 2009 - 2012 |
ducati | streetfighter 1098s | 2009 - 2012 |
ducati | streetfighter 848 | 2012 - 2015 |
Tags: AELLA, Crankcase, Breather, Ducati, 848, 1098, 1198, Multistrada, 1200, Internal, Pressure, Control, Valve, Evo, 2