Motogadget Motoscope Tiny (MST)
- Brand: Motogadget
- Product Code: MG5001010
- Availability: 2-3 Days
- Stock Quantity: 0
motoscope tiny
The motoscope tiny is a very compact, analogue 49 mm (1.93”) speedometer.
The speed is digitally measured and precisely displayed via stepping motor and indicator.
The installation diameter of 49 mm (1.93”) and the installation depth of only 24 mm (1”) provide various installation options.
The
sophisticated technology provides for a classic look without
compromise. The dial completely does without display sections or LCD and
has a convincing classical look. The ideal solution for purists and
minimalists.
Casing
The high quality aluminum casing is machined from solid metal and its surface is anodized black. The bezel is also available in 'anodized black' or 'mirror polished'. The casing is 100% water-tight and resistant to vibrations.
Dial and display
The analogue dial in contrasting black and white is indirectly
illuminated by white LEDs. The innovative LED display is hidden behind
the black part of the dial and only visible through the dial while
operating, not when switched off!
The LED luminosity is automatically adjusted to achieve optimal readability in dark, sunlight and dawn conditions.
If
the speed exceeds the 200 km/h (or 200 mph) on the analogue scale, it
is automatically displayed in the LED display. The maximum speed is
recorded as well
The 4 indicator lights (blue, red and 2 x green) are
also integrated into the dial. These lights are only visible when
operated, too.
Operation
You can toggle between the different information on the LED display
by operating the supplied menu push-button or e.g. the headlight flasher
push-button on the handle bar.
Default value on the display is the
time. If needed, a short actuation of the push-button will display the
values of total distance, day trip, on-board voltage etc.
All
functions are easy to operate with the push-button, e.g. day trip, reset
or the like. Default settings or recorded values are of course stored
even with the power supply switched off.
Installation
The motoscope tiny is easy to install with the two M3 threaded holes on the back side. There are various motogadget brackets available for installation. Refer to "motoscope tiny" page.
Connection and sensors
The detailed installation and operating instructions (refer to
"Downloads") help with the connection of instrument even for users
without any previous experience in handling the vehicle's electrical
system.
The supplied speedometer sensor in stainless steel is very
small (M5/23 mm) and therefore easy to hide. The sensor can be easily
installed on front or rear wheel with the connector cable (1.5 m
long). This allows for the easy conversion of an originally mechanical
speedometer drive on a motorbike.
The motoscope tiny is compatible
with various original speedometer sensors (dry reed contact and
proximity sensors) of the motorbike manufacturers. In this case, the
terminals have to be connected only and the mechanical sensor
installation will be completely obsolete.
An intelligent 'Teach
Function' allows for the easy calibration of the speedometer - even on
vehicles with transmission sensors, e.g. Harley-Davidson (TM).
Parts Included
• Instrument with approx. 75 cm connector cable
• Mini push-button
• 2 removable fuses
• 9 cable end connectors
• Speedometer sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm connector cable
• 2 powerful neodymium mini magnets
• 2 mounting screws M3 with washer
• 2 diodes for pairing of turn signals
•
Detailed installation and operating instructionsstainless steel, IP 68)
with 150 cm (59”)connector cable, 2 powerful neodymium mini magnets, 2
mounting screws M3 with washer, 2 diodes for pairing of turn signals,
detailed installation and operating instructions.
Specifications and Features
• Mounting diameter: 49 mm
• Weight: approx. 96 g
• Mount: 2 x M3 threaded hole
• Power consumption, operating: approx. 200 mA (load dependent)
• Operating voltage: 9 V - 15 V
• Operating temperature: -20... +80 °C
Feature |
Measuring range |
Speedometer, analogue (indicator) |
0 – 200 km/h or mph |
Speedometer, numeric (LED display) |
200 – 999 km/h or mph |
Max. speed |
0 – 999 km/h or mph |
On-board voltage |
9 – 15 V |
Clock |
00:00 – 23:59 |
Trip meter |
0 – 999.9 km or mi |
Total distance (adjustable) |
99999 km or mi max. |
Indicator lights |
turn signal, high beam, neutral, hazard light |
To make the installation of the motoscope tiny easier on newer (2004 and up) Harley-Davidson models with CAN Bus technology look at the motogadget m-CAN adapter.
To connect the motoscope tiny to one of the newer Triumph Twin or Triple models with CAN Bus technology check out the m.TRI from motogadget in the m.gadget section. Choose your model and year.
Tags: Motogadget, Motoscope, tiny, MST