AEM Alloy 55mm Rear Axle Nut Tool for Ducati and MV Agusta
- Brand: AEM FACTORY
- Product Code: DU052
- Availability: 1
- Stock Quantity: 1
AEM
FACTORY parts are all designed and made in Italy to the highest
standards. Made with great attention to detail to achieve the best
functionality and weight loss on every part, and of course great looks.
This is THE tool you’ll need to tighten AEM's 12 Point (bi-hex) rear wheel nuts. Billet machined from the same alloy they use for their nuts, these sockets are meant to be heavy duty and are hard anodized.
For large hub equipped Ducati bikes -Will fit our nuts with the integrated slider too and MV Agusta models.
We always recommend:
1- do NOT USE PNEUMATIC GUNS, impulses can damage the anodized finish
2- use a good quality manual CALIBRATED TORQUE WRENCH with 12mm (1/2″) drive
3- the good old “tape trick”, use a layer of tape around the nuts for extra care to avoid scratches while tightening/loosening
| Make | Model | Years |
|---|---|---|
| ducati | 1098 | 2007 - 2008 |
| ducati | 1098r | 2008 - 2009 |
| ducati | 1098s | 2007 - 2008 |
| ducati | 1198 | 2009 - 2011 |
| ducati | 1198r | 2010 - 2011 |
| ducati | 1198s | 2009 - 2010 |
| ducati | 1198sp | 2011 - 2011 |
| ducati | 1199 panigale | 2012 - 2014 |
| ducati | 1199 panigale r | 2013 - 2017 |
| ducati | 1199 panigale s | 2012 - 2014 |
| ducati | 1299 panigale | 2015 - 2017 |
| ducati | 1299 panigale R FE | 2017 - 2018 |
| ducati | 1299 panigale s | 2015 - 2017 |
| ducati | 1299 superleggera | 2017 - 2017 |
| ducati | diavel | 2011 - 2018 |
| ducati | diavel 1260 | 2019 - 2023 |
| ducati | Diavel 1260 Lamborghini | 2021 - 2021 |
| ducati | diavel 1260 s | 2019 - 2023 |
| ducati | diavel amg | 2012 - 2013 |
| ducati | diavel carbon | 2011 - 2018 |
| ducati | diavel cromo | 2012 - 2012 |
| ducati | diavel strada | 2013 - 2014 |
| ducati | diavel v4 | 2023 - 2026 |
| ducati | diavel v4 rs | 2026 - 2026 |
| ducati | monster 1200 | 2014 - 2022 |
| ducati | monster 1200r | 2016 - 2019 |
| ducati | monster 1200s | 2014 - 2022 |
| ducati | multistrada 1200 | 2010 - 2017 |
| ducati | multistrada 1200 granturismo | 2013 - 2014 |
| ducati | multistrada 1200 pikes peak | 2012 - 2017 |
| ducati | multistrada 1200s | 2010 - 2017 |
| ducati | multistrada 1200s sport | 2011 - 2012 |
| ducati | multistrada 1200s touring | 2011 - 2014 |
| ducati | Multistrada 1260 | 2018 - 2020 |
| ducati | Multistrada 1260 Pikes Peak | 2018 - 2020 |
| ducati | Multistrada 1260 s | 2018 - 2020 |
| ducati | multistrada v4 Pikes Peak | 2022 - 2026 |
| ducati | multistrada v4 rs | 2024 - 2026 |
| ducati | panigale v2 | 2020 - 2024 |
| ducati | Panigale V2 Superquadro FE | 2025 - 2025 |
| ducati | panigale v4 | 2018 - 2024 |
| ducati | panigale v4 r | 2019 - 2021 |
| ducati | panigale v4 r | 2023 - 2024 |
| ducati | panigale v4 s | 2018 - 2024 |
| ducati | streetfighter 1098 | 2009 - 2012 |
| ducati | streetfighter 1098s | 2009 - 2012 |
| ducati | streetfighter v2 | 2022 - 2024 |
| ducati | streetfighter v4 | 2020 - 2024 |
| ducati | streetfighter v4 lamborghini | 2023 - 2023 |
| ducati | streetfighter v4 s | 2020 - 2024 |
| ducati | streetfighter v4 sp | 2022 - 2024 |
| ducati | superleggera | 2014 - 2014 |
| ducati | superleggera v4 | 2020 - 2021 |
| ducati | supersport | 2017 - 2020 |
| ducati | supersport 950 | 2021 - 2025 |
| ducati | supersport 950 s | 2021 - 2025 |
| ducati | supersport s | 2017 - 2020 |
| ducati | xdiavel | 2016 - 2024 |
| ducati | xdiavel s | 2016 - 2024 |
| ducati | xdiavel v4 | 2025 - 2026 |
You May Also Like
CNC Racing Titanium LARGE Left or Right Hand Rear Wheel Axle Nut for D...
CNC Racing Ti Rear Axle Nuts are Strong and lightweight, cmon... you know you want them.So..
$284.95
CNC Racing Large Rear Wheel Axle Nut Set for Ducati's
These kits include nuts for both sides of the rear axle for Single Sided Swingarm Ducati Models..
$89.95
DBK Special Parts (Ducabike) Large Rear Axle Wheel Side Nut for the Du...
Change out your boring Rear Wheel Axle Nut with this lightweight 7075 billet aluminum version fr..
$66.95
DBK Special Parts (Ducabike) Large Sprocket Carrier Side Rear Axle Nut...
Change out your boring Sprocket Carrier Nut with this lightweight 7075 billet aluminum version fr..
$51.95
AEM FACTORY - DUCATI'S WITH SINGLE SIDED SWINGARM LARGE TITANIUM REAR ...
AEM FACTORY parts are all designed and made in Italy to the highest standards. Made with great atte..
$344.95
AEM FACTORY - DUCATI'S WITH SINGLE SIDED SWINGARM LARGE ALUMINUM REAR ...
AEM FACTORY parts are all designed and made in Italy to the highest standards. Made with great atte..
$99.95
Motocorse Billet Titanium Rear Wheel / Sprocket Nut for Ducati's and M...
The Motocorse billet rear nut (M48x1.5) is made of titanium and constructed through the use o..
$304.95
MotoMFG Steel 55/30mm Rear/Front Axle Nut Combo Tool
Wheel nut tool for your Large Hub Ducati. It is two tools in one a, 55mm 12pt for the rear a..
$39.95
AELLA Large Hub Two Titanium Nuts & Aluminum Taper Cone Set (Rear ...
This page is a set of two nuts and a tapered cone. Refer to AT-DU 105 for a set of nut and taper co..
$469.95
AELLA Large Hub Titanium Nut For Rear Axle
This page is a page of a single nut. Refer to AT-DU 205 for a complete set of AT-DU 105 with tapered..
$259.95
AELLA Large Hub One Titanium Nut & Aluminum Taper Cone Set (Rear A...
This page is a page of a set of nuts and tapered cones. Refer to AT-DU205 for nut single body, AT-DU..
$269.95
CNC Racing Bi-Color Left or Right Hand Rear Axle Nut for Large hub (6 ...
Rear wheel Axle nut made in light alloy, machined from solid and then anodized.The design is charact..
$50.95
AEM FACTORY - DUCATI'S WITH SINGLE SIDED SWINGARM LARGE ALUMINUM REAR ...
AEM FACTORY parts are all designed and made in Italy to the highest standards. Made with great..
$70.95
Motocorse Rear Wheel / Sprocket Nut Axle Tool for Ducati's and MV Agus...
This Awesome Tool is designed to work with all the MV's and any Ducati's with the Large Rear axle ..
$109.95
Aella Alloy 55mm Rear Axle Nut Tool - Ducati and MV Agusta Large hub
Aluminum socket with Anti Scratch Liner for rear wheel55mm Rear nut socket with 3/4 inch drive (19mm..
$84.95
CNC Racing Large Rear Wheel Axle Nut Lock Pin (clip)
Safety spring clip for Large hub Ducati rear wheel nut, made of painted harmonic steel. Plug&am..
$16.95
DBK Special Parts (Ducabike) Large Rear Wheel Axle Nut Lock Pin (clip)...
Replaces the Original lock pin. Made from high Quality Stainless steel, then coated in Black ..
$21.95
Motocorse Billet Titanium Large Rear Wheel Taper Cone Spacer for Ducat...
The Motocorse Taper Cone spacer is made of titanium and Beautifully constructed through..
$219.95
Tags: AEM, Alloy, 55mm, Rear, Axle, Nut, Tool, Ducati, MV, Agusta