Clutch cover guard (Panigale V4 / right side)- Replaced by the new version that fits the 2019 models
※Please be careful.
The 2019 model is slightly different in the installation position of the cowling, so it does not fit because the front of the guard comes in contact with the cowl.
Guard securely magnesium crankcase.
Magnesium is used for the crankcase of Panigale V4 for weight reduction, and expensive replacement expenses are required if the standing objects and other overturned scratches are scratched.
The AELLA made guard applies hard alumite treatment to aluminum scraping out (A 2017 material), enhancing the surface strength and color matching with the magnesium cover as well as the unique color. Although it is a color like champagne gold, there is no color fading due to heat or ultraviolet rays because it is uncolored alumite. (* A slight difference in color tone arises due to the lot of alumite.It may not be exactly the same color on the left and right.)
The shape is the most sticky place, it is designed so that thickness (pop-out) does not come out as much as possible.
The maximum wall thickness is 6 mm and the load is 2.5 mm. Place a heat-resistant fluorocarbon rubber on the inside of the cover to relieve the shock applied to the case in the event of a fall.
○ Other merits
· Can be used with AELLA engine slider.
· Installation is possible only by removing the lower cowl, installation of the product itself is about several minutes.
||2018 - 2018
||panigale v4 s
||2018 - 2018