MWR Performance, HE, & Race Filters For Honda CBR1000RR-R (2020+)

MWR Air Filters are built upon 2 decades of experience in developing and producing high performance air filters for road, race, and off road use.

This experience has been gained working with some of the biggest air filter companies in Europe in areas such as World MX, Dakar (bikes, cars and trucks), Moto GP, WSB, BSB, AMA and even Rallycross. The knowledge gained during this period was invaluable and led MWR to develop their range of performance foam filters.

With the “HE” / “R” & "WSBK" filter (the WSBK Filter is sold in a different listing) it is important to check and optimize the fueling on each cylinder separate , if you don’t it will cause vibrations in the engine because the standard fuel mappings are way out of balance

This new design omits the two "wings", instead they applied a reinforcement to prevent bending, in this way the installation is facilitated, the filter is fixed by two cams attached to the lid on the front and pushed into place, on the back are three brackets like the original filter and are attached in the original way.

The Performance Filter (MC-030-20)

This filter is a direct performance upgrade from your bikes standard filter. Offering better airflow and protection than the original, this filter will (when maintained correctly) last the life of your bike, simply clean and re-oil once a year.

The HE (High Efficient) air filter (MC-030-20-HE) for road & race bikes

The revolutionary HE Air filter increases power and reduces intake noise. Unlike any other sports filter all inlets will get the same quantity of air, regardless of the speed of the motorcycle or wind directions. This is because of the unique design of the Air Splitter Plate (see illustration to understand how the Air Splitter works) and how it evenly distributes air throughout the airbox. No different fuel-mappings between internal & external or front & rear cylinders are needed. Clean and re-oil once a year.

The Full Race (RACE ONLY) air filter (MC-030-20-R)

Developed on the track, NOT on a dyno but in real life on bikes with Data-loggers being tested and developed in part with TOP Teams for ultimate performance. With new materials and a new design, protection is on the same level as the filters above, only for a shorter period of time before they must be serviced.

It makes the bike stronger and smoother, therefore it saves tires and fuel. Check the air filter every race weekend and always start each race weekend with a well oiled filter. This air filter is not developed to reduce the inlet noise. Due to the design features of this filter we do not recommend it for road use.

NOTE: The two brackets are separate (in OEM filter they are one with the filter) and included with all the filters, there is a left & right side. These Do fit the SP1 and SP2 versions of the bike as well

Don't forget to check out the NEW velocity stacks!!!