 |
 |
 |
I2M Data acquisition system allows you to acquire several parameters.
Recording trajectories and GPS speeds you can obtain laptimes, and as
many split times as you like (accurate to 1/100s). You can also add the
acquisition of RPM, rear wheel speed, gears in use, TPS, all without adding
any auxiliary sensor.Otherwise, by adding sensors you can also record
suspensions, front wheel speed, tire temperature, brake pressure, the
value of lambda sensor or any other sensor signal up to a total of 6 analog
channels, 2 speed and 1 RPM. Our acquisition system is composed by 2
distinct but joined elements: the multi input central unit Dasy6 (that
contains the hardware needed) and Danas2 (PC software which allows the
user to analyze data acquired with Dasy) The system is easily customizable
for each pilot needs.intro2 If a pilot needs a plain version, he can use Dasy
only with GPS data, however being able to understand where can improve
his performances analyzing various GPS paths and splits of different laps.
If a pilot wish to understand also how to improve he can simply add bike
provided signals. If a pilot wants a more detailed analysis he can use the
complete system adding auxiliary sensors.
Dasy6 system is based on a compact central unit which receive power
supply (12V) directly from the bike and for this reason can acquire data for
a long time, limited only by the memory available for storage. On the front
panel you can find all the connectors for the various inputs available. Each
input has its own connector so it is simple to install and use Dasy. On the
top of the box, 3 leds allow to monitor the working status of the system
and of its GPS receiver. The system dasy 6 is based on a compact unit
powered from the vehicle (12V) and therefore it can acquire data for a
long time, oimited only by the memory available for storage (1GB). On the
front panel you can find all the connectors for the various inputs
available.clicca per ingrandire The two connectors for the 6 analog
channels provide also 5V output that can be used to power any external
sensors such as linear potentiometers. The input for digital signals
provides also a 12V output that canbe used to power any external speed
sensors. On the top of the box, 3 leds allow to monitor the operating
status of the system and of its GPS receiver.
The data collected is stored on a flash memory. At the end of the
session it will be possible to connect a PC directly to the system through
dasy USB front plug in order to download data. If you don't have a PC you
can download data and system configuration, even through a simple USB
pen.
Connect the key and the system will download the data without the need
for any external command, at the end of the process, the LED will stop
clicca per ingrandireflashing and you can extract the memory. The data
already present on the external memory will not beaffected thus making it
possible to use this method of downloading with any key, even already
partially used. The analisys of the collected data using 10Hz GPS
technology becomes easy even for novice users thanks to Dasy. GPS
tracking allows to instantly identify what parts of the track relate with each
point of collected data moreover it gives valuable information about
speed and trajectory. The furtheracquisition of RPM, throttle, rear wheel
speed (without additional sensors) allow to give a concrete meaning to
the collected data and convert this information directly to the driving
information. The Dasy6 system is equipped with an output specially
dedicated to miniLAP. You can then, with only one receiver, acquire digital
and analog channels and real-time display your lap times, taking also
advantage of a GPS stopwatch.
clicca per ingrandireThe Dasy6 system, thanks to its output sync is able
to control the activation of cameras such as the onboard video
FlyCamOne2 obtaining video synchronous with the data collected. Videos
can then be visualized and then analyzed using the video function of
Danas2.
Features
- Detection trajectories and GPS speed to 10Hz
- Display accelerations and decelerations
- 6 Analog inputs 10-bit
- 2 independent speed inputs
- 1 RPM input
- inserted gears
- USB data download or by USB pen
- use of a remote command
- Output for miniLAP connection to display times
- 32 configuration options to start sampling
- Saving on internal memory 1GB
- Comparative analysis of different rounds or different sessions
- Calculation of km traveled, best lap, lap ideal session length
- Compact dimensions 120x80x24 mm
- Low weight: 200g + 90g (GPS)
- Receiver 10Hz with 66canali
Recording trajectories and GPS speeds you can obtain laptimes, and as
many split times as you like (accurate to 1/100s). You can also add the
acquisition of RPM, rear wheel speed, gears in use, TPS, all without adding
any auxiliary sensor.Otherwise, by adding sensors you can also record
suspensions, front wheel speed, tire temperature, brake pressure, the
value of lambda sensor or any other sensor signal up to a total of 6 analog
channels, 2 speed and 1 RPM. Our acquisition system is composed by 2
distinct but joined elements: the multi input central unit Dasy6 (that
contains the hardware needed) and Danas2 (PC software which allows the
user to analyze data acquired with Dasy) The system is easily customizable
for each pilot needs.intro2 If a pilot needs a plain version, he can use Dasy
only with GPS data, however being able to understand where can improve
his performances analyzing various GPS paths and splits of different laps.
If a pilot wish to understand also how to improve he can simply add bike
provided signals. If a pilot wants a more detailed analysis he can use the
complete system adding auxiliary sensors.
Dasy6 system is based on a compact central unit which receive power
supply (12V) directly from the bike and for this reason can acquire data for
a long time, limited only by the memory available for storage. On the front
panel you can find all the connectors for the various inputs available. Each
input has its own connector so it is simple to install and use Dasy. On the
top of the box, 3 leds allow to monitor the working status of the system
and of its GPS receiver. The system dasy 6 is based on a compact unit
powered from the vehicle (12V) and therefore it can acquire data for a
long time, oimited only by the memory available for storage (1GB). On the
front panel you can find all the connectors for the various inputs
available.clicca per ingrandire The two connectors for the 6 analog
channels provide also 5V output that can be used to power any external
sensors such as linear potentiometers. The input for digital signals
provides also a 12V output that canbe used to power any external speed
sensors. On the top of the box, 3 leds allow to monitor the operating
status of the system and of its GPS receiver.
The data collected is stored on a flash memory. At the end of the
session it will be possible to connect a PC directly to the system through
dasy USB front plug in order to download data. If you don't have a PC you
can download data and system configuration, even through a simple USB
pen.
Connect the key and the system will download the data without the need
for any external command, at the end of the process, the LED will stop
clicca per ingrandireflashing and you can extract the memory. The data
already present on the external memory will not beaffected thus making it
possible to use this method of downloading with any key, even already
partially used. The analisys of the collected data using 10Hz GPS
technology becomes easy even for novice users thanks to Dasy. GPS
tracking allows to instantly identify what parts of the track relate with each
point of collected data moreover it gives valuable information about
speed and trajectory. The furtheracquisition of RPM, throttle, rear wheel
speed (without additional sensors) allow to give a concrete meaning to
the collected data and convert this information directly to the driving
information. The Dasy6 system is equipped with an output specially
dedicated to miniLAP. You can then, with only one receiver, acquire digital
and analog channels and real-time display your lap times, taking also
advantage of a GPS stopwatch.
clicca per ingrandireThe Dasy6 system, thanks to its output sync is able
to control the activation of cameras such as the onboard video
FlyCamOne2 obtaining video synchronous with the data collected. Videos
can then be visualized and then analyzed using the video function of
Danas2.
Features
- Detection trajectories and GPS speed to 10Hz
- Display accelerations and decelerations
- 6 Analog inputs 10-bit
- 2 independent speed inputs
- 1 RPM input
- inserted gears
- USB data download or by USB pen
- use of a remote command
- Output for miniLAP connection to display times
- 32 configuration options to start sampling
- Saving on internal memory 1GB
- Comparative analysis of different rounds or different sessions
- Calculation of km traveled, best lap, lap ideal session length
- Compact dimensions 120x80x24 mm
- Low weight: 200g + 90g (GPS)
- Receiver 10Hz with 66canali
| Products For Sale |
 |
 |
 |
 |
